-
FUEL FILTER 200 & 300Tdi
1 × $16.01 -
VOLTAGE STABILIZER
1 × $44.00 -
BOLT, PROPSHAFT UNIVERSAL JOINT
1 × $1.27 -
BRAKE WEAR SENSOR, FRONT - RANGE ROVER SPORT
1 × $15.02 -
BRAKE FLUID TESTER
1 × $55.00 -
Carburettor Spanner Kit
1 × $39.05 -
TAPE COACH LINE DOUBLE, XJ SERIES JAG
1 × $42.90 -
Accelerator Cable, Rover Mini, Multi Point Injection
1 × $53.74 -
SENSOR, LAMBDA
1 × $119.74 -
HT Lead Ignition Spark Tester
1 × $49.50 -
Long Male Brake Nut 3/8 UNF x 24tpi
1 × $2.42 -
Temp Transmitter, Multi Use inc Cooper-S
1 × $16.50 -
Exhaust Manifold Gasket
1 × $14.85 -
HEADLAMP BULB, MAIN BEAM
1 × $95.48 -
Adaptor Fuel Bowl To Carby L/Hand 30 Degree
1 × $16.78 -
Setscrew, Multi use
4 × $1.05 -
Head Gasket RHB
1 × $66.00 -
HARNESS, INJECTION, TD5
1 × $77.00 -
AIR FILTER - X TYPE X400
1 × $23.93 -
Lower Control Arm - RHF
1 × $221.22 -
By-pass Hose Clamp
1 × $3.06 -
HOSE - THROTTLE BODY HEATER OUTLET
1 × $26.40 -
Dowel, Steering Arm to Swivel Hub
1 × $8.21 -
Engine Timing Tool Kit - for Ford Duratorq Diesel
1 × $55.00 -
CLUTCH FORK BUSH
1 × $4.13 -
Anti-rattle Bush, Nylon
1 × $12.35 -
Colour Tune, Single Plug Kit, 14mm
1 × $126.50 -
CATCH, SLIDING WINDOW - SERIES LR
1 × $10.67 -
Coil, Ignition
1 × $73.43 -
INSERT -TREAD MAT REAR BAR - D3
1 × $40.15 -
CLIP-WASHER JET - HEADLAMP - GENUINE
1 × $4.50 -
Apron Panel, Repair Section Front L/Hand
1 × $141.63 -
Diesel Injector Extractor - for JLR 2.7, 3.6 engines
1 × $217.25 -
Alternator 17ACR, 45 Amp with Internal Regulator
1 × $181.50
MGB and MGB GT
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
$16.78
Adaptor Fuel Bowl To Carby  L/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about 1 o’clock position.
-
$16.78
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about ’11 o’clock position.
-
-
$7.70
Alternator Adjusting Link,
This is a Second Hand Part
-
-
Availability: This product is currently out of stock.
Alternator Mounting Bracket Rear Pre A Plus Engines
Can be used on any alternator, However For originality on
Mini Cooper S Mk2 Clubman Gt & Mini K use AYA9189-S
which incorporates coil mounting provision this is a 2/Hand Part
For A Plus engines use CAM4853-S
-
$128.15
ANGLE DRIVE ADAPTER – SPEEDO CABLE
-
$6.60
Battery Cable Earth, Battery to Body with Screw in fitting.
Suits Mini 1985 – 2001, MGB
New Old Stock
-
$3.03
Battery Lead End Insulator (Rubber Boot)
Fitted to the end of the battery leads where they attach to the solenoid.
-
-
$2.53
LH & RH Front
Bleed nipple for front wheel cylinders on twin leading shoe type set ups, this is where you have 2 cylinders per hub
Will also fit front calipers on disc assemblies
-
-
$77.28
Body Moulding Fixings Kit
Items in this package:
6 Stud Plate – AHH6360
42 Round Tuckers moulding clip for 11.3mm moulding gap and 3.2mm panel hole.
6 Nut – No 10 – 3/16 inch UNF x 3/8 inch – HN2005
6 Washer – Single Coil Locking – ID 5mm – WL105001 -
$242.00
Boss Kit, Suit Moto-Lita Steering Wheel