-
Diesel Injector Extractor - for JLR 2.7, 3.6 engines
1 × $217.25 -
Adjustable Front Lower Arm Kit
1 × $209.00 -
Battery Tray
1 × $7.15 -
AIR FILTER - SUIT R50 MANUAL - BMW MINI
1 × $22.00 -
12v/ 240v PORTABLE 45L FRIDGE FREEZER
1 × $1,228.15 -
Fuel Tank Sender Float
1 × $15.87 -
LAMBDA/O2 SENSOR ASSY, FRONT/UPSTREAM - V6/V8
1 × $155.93 -
Clip, 1/4 Turn Click Type
1 × $2.81 -
BANJO BOLT - BRAKE PIPE
1 × $9.90 -
Headlamp, 7" Sealed Beam
2 × $16.50 -
BRAKE FLUID TESTER
1 × $55.00 -
Alloy Pedal Pad's, Race Use
1 × $52.00 -
Alternator 17ACR, 45 Amp with Internal Regulator
1 × $181.50 -
Camshaft Sensor
1 × $60.50 -
DISTRIBUTOR CLAMP - "A" PLUS ENGINE
1 × $9.90 -
By-pass Hose Clamp
1 × $3.06 -
BALLJOINT, FR UPPER - DISCOVERY 3, 4 & RANGE ROVER SPORT
1 × $24.26 -
Accelerator Cable
1 × $12.10 -
Adaptor Fuel Bowl To Carby L/Hand 30 Degree
1 × $16.78
MGB and MGB GT
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
$16.78
Adaptor Fuel Bowl To Carby  L/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about 1 o’clock position.
-
$16.78
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about ’11 o’clock position.
-
-
$7.70
Alternator Adjusting Link,
This is a Second Hand Part
-
-
Availability: This product is currently out of stock.
Alternator Mounting Bracket Rear Pre A Plus Engines
Can be used on any alternator, However For originality on
Mini Cooper S Mk2 Clubman Gt & Mini K use AYA9189-S
which incorporates coil mounting provision this is a 2/Hand Part
For A Plus engines use CAM4853-S
-
$128.15
ANGLE DRIVE ADAPTER – SPEEDO CABLE
-
$6.60
Battery Cable Earth, Battery to Body with Screw in fitting.
Suits Mini 1985 – 2001, MGB
New Old Stock
-
$3.03
Battery Lead End Insulator (Rubber Boot)
Fitted to the end of the battery leads where they attach to the solenoid.
-
-
$2.53
LH & RH Front
Bleed nipple for front wheel cylinders on twin leading shoe type set ups, this is where you have 2 cylinders per hub
Will also fit front calipers on disc assemblies
-
-
$77.28
Body Moulding Fixings Kit
Items in this package:
6 Stud Plate – AHH6360
42 Round Tuckers moulding clip for 11.3mm moulding gap and 3.2mm panel hole.
6 Nut – No 10 – 3/16 inch UNF x 3/8 inch – HN2005
6 Washer – Single Coil Locking – ID 5mm – WL105001 -
$242.00
Boss Kit, Suit Moto-Lita Steering Wheel