You have no item(s) in your cart
Brakes
-
$2.53
LH & RH Front
Bleed nipple for front wheel cylinders on twin leading shoe type set ups, this is where you have 2 cylinders per hub
Will also fit front calipers on disc assemblies
-
-
-
$55.00
BRAKE FLUID TESTER – SUITS ANY CAR
-
-
-
-
-
-
-
-
$5.50
Cap Master Cylinder, Early Plastic Lockheed Type 2/Hand
Has original Lockheed markings on cap. This is 2/Hand so may need cleaning.
This is the small master cylinder cap as fitted to both the brake & clutch master cylinders. This is the small cap and was fitted to the tin can master cylinders and some plastic master cylinders. This is about the size of a 50c piece
Plastic cap as supplied on single line brake cylinders pre 1976 and all clutch masters.
It doesn’t often break or wear out but it gets lost or turns yellow. The early steel master cylinder reservoir caps had a tendency to rust on, so this white plastic could be considered an upgrade unless you wish to keep your Pre 1963 car original with a metal cap 17H3723
-
$27.01
Repair kit for brake & clutch master cylinder with 0.75″ bore.
Suits Mini 1985 on and MGB 1968 – 1980
-
$1.18
Brake Union Copper Washer between Banjo Bolt & 2-Way Brake Light Switch
This washer goes on the upper flange of the brake light switch union banjo bolt and on the upper banjo bolt for the rover/verto clutch hose.
The washer is is 17.4mm wide with an 11.4mm diameter hole. It is number 17 in the diagram below.
-
Availability: This product is currently out of stock.
Courtesy lamp and handbrake warning light switch – push-in type
Sometimes called an interior lamp switch
On some model Minis this switch may need to have the end section bent at a right angle to fit