-
Alternator Conversion Plug, 5 Terminal to 3 Terminal
1 × $33.00 -
Grease Nipple Multi Use
1 × $2.70 -
Apron Panel, Repair Section Front L/Hand
1 × $141.63 -
Anti-rattle Spring
1 × $10.45 -
Apron Panel Adaptor L/H, later grille panel to early type
1 × $64.46 -
Nut, 3/8" Multiple use
1 × $0.50 -
Distributor Cap, Suit 43D, 45D & 59D Distributor
1 × $13.00 -
Anti-rattle Bush, Nylon
1 × $12.35 -
Oxygen ambient air sensor with Rover Mini Fuel injected
1 × $90.75 -
Ammeter Gauge, Smiths 2 inch, Black Face 60/60
1 × $198.69 -
Distributor Cap, Suit 43D, 45D & 59D Distributors. Lucas Brand
1 × $20.85 -
Brake Light Switch
1 × $9.00 -
Electronic Ignition Conversion Kit Suit 43D, 45D & 59D Type Distributor
1 × $72.00
Fuel System
-
$13.20
Abutment Bracket, Metal bracket that fits between the manifold for HS4 Carburettor
To secure cable to carburettor use # AYH9377
-
$77.00
Abutment Bracket. Metal bracket that fits between the Manifold HIF44 (1.75″) & HIF38 SU Carburettors.
For HS4 Carburettor use # 12G766S
To secure cable to carburettor use # AYH9377 clip
-
-
-
-
$34.65
Accelerator Cable, Rover Mini Single Point Injection
Suits Mini 1990 on with the 1275cc engine.
-
-
$36.25
Accelerator Pedal, Wider Type
This type of pedal was fitted to the Rover Mini and can be fitted to any Australian Mini
-
$16.78
Adaptor Fuel Bowl To Carby L/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about 1 o’clock position.
-
$16.78
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about ’11 o’clock position.
-
-
-
$20.85
Air Filter
-
-