-
Rotor Arm, Suit Ducellier Distributor
2 × $7.59 -
Viscous Fan Spanner 32/36mm
1 × $55.00 -
Fuse Box Cover
1 × $22.55 -
Sump Plug & Washer
1 × $5.50 -
Brake Light Switch
1 × $9.00 -
LEFT HAND, REAR QUARTER SIDE PANEL - UK MINI
1 × $535.00 -
Adaptor, Oil Cooler Hose to Filter
1 × $12.19 -
Radiator Cap, Short Reach Type
1 × $9.90 -
Thermostat Housing
1 × $24.20 -
Blanking Plug, Various Uses
3 × $4.24 -
Carburettor Bell & Float Screw, All SU Carburettors
1 × $2.75 -
Cylinder Head Stud, Short
1 × $13.00 -
By-pass Hose Adaptor, Long
1 × $22.00 -
Rocker Arm Bush
1 × $7.15 -
By-pass Hose, Standard
1 × $5.94 -
Thermostat Housing Spacer
1 × $19.80 -
Thermostat Housing Stud 48mm (1.9375") Long
1 × $2.82 -
Cylinder Head Nut, Plain
1 × $2.81 -
Cylinder Head Washer Set, Competition Grade
1 × $9.90 -
Lock Nut Brake Hose to Trailing Arm
2 × $0.55 -
Oxygen ambient air sensor with Rover Mini Fuel injected
1 × $90.75
Fuel System
-
Availability: This product is currently out of stock.
Seal, Fuel Tank Filler Neck, Sedan & Van
Will fit all models. This is a thinner seal than # 14A7057.
Originally fitted to the MPI Mini
-
-
-
$99.00
Sender Unit, Moke Fuel Tank, Locking Ring Type
Fitted to the Square shaped tank
-
$1.38
Set Screw, 1/4″ x 5/8″ UNF, Multi Use
-
-
$28.60
Spacer, Carburettor To Manifold, 9/16″ Thick, Or
Aprox 14mm Thick Suit All SU 1 3/4″ Carburettors
-
-
$24.75
Speedo Cable – Screw On Type
26″ (660 mm long) This is the Standard Length
If you require a longer cable with screw on fittings use # GSD105
-
$16.01
SU Carburettor Needle Number 7 Lean Needle Twin 1-1/2 Su
AUD1006 OEM
Part Number Needle 7 Will Be Stamped On Needle
-
$5.01
SU Electric Fuel Pump Gasket
-
Availability: This product is currently out of stock.
SU needle conversion kit
Used to convert to fixed needle in floating needle type carburettors.
Mini & Moke
-
$9.90
A Worn throttle Shaft (spindle) can cause erratic performance and sometimes the housing is worn as well.
This bush is used on both sides of the carburettor to repair a worn carburettor body, often required when replacing the throttle shaft (spindle) on the HS4 carburettor.
As a guide the internal diameter is .3125 you may have to ream body to 9.55mm.
-
$10.45
A Worn throttle Shaft (spindle) can cause erratic performance and sometimes the housing is worn as well.
This bush is used on both sides of the carburettor to repair a worn HS2 carburettor body, often required when replacing the throttle shaft (spindle) on the carburettor.
Qty 2 required
-