You have no item(s) in your cart
Brakes
-
-
$2.31Add to cart
Clevis pin that retains the handbrake cable to the lever sticking out from the rear backplates. If the pins have any sign of wear, change them as they cause extra play and function of handbrake.
-
$2.75Add to cart
This long clevis pin holds the handbrake quadrant on the rear subframe on all UK dry suspension Mini’s.
May be used instead of bolt # BH605281
-
$2.09Add to cart
Clevis Pin, Master Cylinder to Pedal
This is the clevis pin that goes through the bottom of the master cylinders, this should have a split pin in it and attaches to your foot pedal that operates the master cylinder.
-
-
$16.50Add to cart
2 x Clips & 4 x Pins kit
These pins and retainer clips should always be changed when fitting new pads.
For vehicles with 8.4″ solid discs and standard 2 pot calipers.
-
$27.01Add to cart
Repair kit for brake & clutch master cylinder with 0.75″ bore.
Suits Mini 1985 on and MGB 1968 – 1980
-
$58.03Add to cart
Clutch Master Cylinder to Slave Cylinder Hose Pipe
To suit large capped plastic tank clutch master cylinder, but will still fit earlier tin tank master cylinders.
-
$19.80Add to cart
Handbrake Compensator Bracket
Where cables meet and the rear of the front cable screws in, also known as equaliser bracket.
Fitted to single handbrake cable cars from 1976 on
-
-
$1.60
Copper Washer, Clutch Hose to Slave Cylinder and Brake Hose to 3-Way Connection
-
$1.18
Brake Union Copper Washer between Banjo Bolt & 2-Way Brake Light Switch
This washer goes on the upper flange of the brake light switch union banjo bolt and on the upper banjo bolt for the rover/verto clutch hose.
The washer is is 17.4mm wide with an 11.4mm diameter hole. It is number 17 in the diagram below.
-
Availability: This product is currently out of stock.
Courtesy lamp and handbrake warning light switch – push-in type
Sometimes called an interior lamp switch
On some model Minis this switch may need to have the end section bent at a right angle to fit
-
$6.82Add to cart
CV Nut for Disc Brakes, 7.5″ & 8.4″ Discs
Metric size nut for those with metric tool kits.
For original UNF size See # BTA249
Not Mini Cooper use # 21A79
-
$8.58Add to cart
Plastic Master Cylinder Cap Diaphragm,
Suits Australian Made Plastic Master Cylinder Reservoir, Mini & Moke 1969 – 1974