-
HOUSING, RHF CALIPER
1 × $124.99 -
Sensor, Brake Pad Wear Rear
1 × $16.50 -
Headlamp Bucket Kit, (Bowl) Suit 7'' Lamps - CHROME BEZEL
1 × $40.00 -
LHR OUTER WAIST SEAL - DEF
1 × $30.53 -
ENGINE GASKET KIT (ELRING)
1 × $120.00 -
Brake Hose, MGB 1962 - 1978, Sprite Midget 1963 -1979
1 × $15.40 -
BEARING, REAR WHEEL (NTN OEM) - RANGE ROVER EVOQUE & JAGUAR MODELS
2 × $121.00 -
Distributor Cap, Suit 43D, 45D & 59D Distributor
1 × $13.00 -
Rotor Arm, Suit Ducellier Distributor
1 × $7.59 -
FRONT BAR INCLUDING LED's - DEF
1 × $352.00 -
CABLE, INNER HANDLE to LATCH RELEASE - FL2
1 × $17.00 -
Nut, 3/8" Multiple use
1 × $0.50 -
Big End Bolt, Suit 998 1098 Engines Sold Each
1 × $45.99 -
PUMP, POWER STEERING
1 × $379.67 -
AIR FILTER - STYPE/XJ/XF
1 × $17.00 -
Bleed Screw, Wheel Cylinders
1 × $2.53 -
NYLOC NUT, PROPSHAFT
1 × $0.59 -
HORN, HIGH TONE - XJ6 S3 & XJ40
1 × $69.03
THROTTLE LINK
SKU: 231381Available
$49.50
THROTTLE LINK – Coupling -Rod to Spindle, Carburettors
Only 1 left in stock
Description
THROTTLE LINK – Coupling -Rod to Spindle, Carburettors
The AUC4334 Coupling is the flexible connector between sections of the carburettor throttle shaft(s) in the MGA. AKA “Accordion Clamp”. It is tortionally stiff on the rotational axis while being flexible in other directions (like a universal joint).
The clamping screw is a 4BA hex head bolt. There is a notch in one side of the clamp to prevent rotation of the bolt. Opposite side of the clamp is flat to accept the flat washer and 4BA hex nut. Suggest you install these parts with the bolt head down and hex nut on top for easy wrenching. If you remove the clamp from the shaft and leave the nuts loose, the screw can fall out of the open side of the clamp. Do try not to lose the odd fasteners.
Related parts:
AUC2669 Bolt for coupling (hex) (4)
AUC4612 Washer for bolt (plain) (4)
AUC2673 Nut for bolt, coupling (4) -Part No. changed to AJD8014Z
AJD8014Z Nut for bolt, coupling (4) -Part No. change; was AUC2673