-
Chrome Plug, Left & Right Hand Doors
1 × $6.44 -
HOSE CLIP MULTI USE
1 × $15.68 -
Brake Spanner - 1/4'' Sq x 10mm Sq
1 × $20.90 -
Camshaft Sensor
1 × $55.00 -
BEARING - DOUBLE ROW - SUIT MOST MINI GEARBOX'S
1 × $101.95 -
FRONT ABS SENSOR - JAGUAR XE & X260 XF
1 × $28.33 -
12v/ 240v PORTABLE 45L FRIDGE FREEZER
1 × $1,228.15 -
BRAKE FLUID TESTER
1 × $55.00 -
Boot Badge, Leyland Mini
1 × $13.20 -
Alloy Pedal Pad's, Race Use
1 × $52.00 -
Setscrew, Multi use
2 × $1.05 -
Clip, Interior Trim
2 × $2.86 -
CAP, COOLANT EXPANSION TANK - 200kpa
1 × $11.94 -
Colour Tune, Single Plug Kit, 14mm
2 × $126.50 -
GEAR LEVER - REPAIR KIT - TRIUMPH - SPITFIRE - HERALD
1 × $45.00 -
Fir Tree Fixing - for Land Rover, General Use
1 × $0.99 -
Headlamp Bucket Kit, (Bowl) Suit 7'' Lamps - BLACK BEZEL
1 × $40.00 -
Distributor Assembly, 45D Points Type With Vac Advance
1 × $104.50 -
BOLT, PROPSHAFT UNIVERSAL JOINT
1 × $1.27 -
Electronic Ignition Conversion Kit Suit 43D, 45D & 59D Type Distributor
1 × $82.50 -
BEARING, REAR WHEEL - RANGE ROVER EVOQUE & JAGUAR MODELS
3 × $42.97 -
Door Mirror - LH (Flat Glass)
1 × $88.00 -
Long Male Brake Nut 10 x 1.25mm Pk 50
1 × $24.20 -
Rotor Arm, 45D Distributor
1 × $6.60 -
Ashtray Holder Assembly
1 × $11.00 -
RECOVERY - DEFENDER NAS STYLE REAR STEP WITH BLACK RUBBER
1 × $1,000.00 -
Exhaust Bracket, Fitted To Gearbox
1 × $4.10 -
Fuel Injector Remover - for JLR
1 × $225.23 -
Bush, Front Radius Arm
1 × $15.13 -
Grease Nipple Multi Use
1 × $2.70 -
Fuel Filter, Rover Mini SPI
1 × $27.50 -
LOWER CONTROL ARM, REAR
1 × $130.50 -
ALTERNATOR - DISC/SPORT GENUINE
1 × $907.50 -
Filter, Pollen / Cabin
1 × $15.02 -
Bearing, Idler Gear & Control Arm
1 × $8.95 -
Aluminium Torch - 3w Cree bulb
1 × $29.95 -
Alternator Conversion Plug, 5 Terminal to 3 Terminal
1 × $33.00 -
FILTER - ENGINE OIL
1 × $9.13 -
ENGINE OIL COOLER - 2.0 TiVCT PETROL TURBO
1 × $119.70 -
Bush, Steering Column Bottom, Felt
1 × $16.50 -
Bush, Front Lower Caster Arm - D5/RRS/RR
1 × $59.68 -
Washer Bottle Lucas Brand
1 × $20.30
Body Electrics
-
$3.03
Battery Lead End Insulator (Rubber Boot)
Fitted to the end of the battery leads where they attach to the solenoid.
-
Availability: This product is currently out of stock.
Brake Light Switch, Hydraulic, Multi Use
-
$14.30
Bulb Holder, Suit Centre Mounted Speedo
-
$14.30
Distributor Points Set suit 23D, 25D & 29D Lucas Distributors
These points ‘bolt on’ to the condenser with a nut.
These were fitted up to about 1974 however the distributor is easily changed.
-
$75.63
Electronic Ignition Kit, 4 Cyl, 25D Dist
Electronic Ignition Conversion Kit Suit 23D &Â 25D type distributor aka RTC3875K
-
$7.48
Flasher Relay, 2 Pin, Various models
-
-
-
$40.00
Headlamp Bucket (Bowl) Suit 7″ Lamps
This plastic bucket kit includes the inner rim to hold the light unit in place. The headlamp outer rim is not included in the kit.
Qty 2 required per car
-
$40.00
Headlamp Bucket (Bowl) Suit 7″ Lamps
This plastic bucket kit includes the inner rim to hold the light unit in place. The headlamp outer rim is not included in the kit.
Qty 2 required per car
-
$86.90
Starter Solenoid with integral Push Button
Push button starter solenoid to suit many pre- 1967 British cars.
As found typically on many British Classic Cars
-
$44.00
Voltage stabilizer for Smiths & Jaeger Instruments.
Provides 10 volt feed to Smiths gauges. Negative Earth only.
Note the outer casing of the unit should be earthed.
One voltage stabilizer is enough to run up to 3 Smiths gauges.
If you are having trouble with your fuel gauge and your temperature gauge its a pretty safe bet that this little box is the cure for your troubles.
They do wear out and they are often found to be putting out an incorrect voltage
-
$20.30
This plastic washer bottle is for the early Mini’s with a 2″ neck size, with internal tube and non return valve.
It is made from white plastic and is supplied with a removable screw cap with tube & filter. The bottle has the words “LUCAS ENGLAND” embossed on the front.
-
$49.50
Washer Bottle, includes Cap & Valve. Tudor Brand
This plastic washer bottle is for early Mini’s with the Tudor logo.
It has a 2″ neck size, with internal tube and non return valve.
-