-
Bolt, Mount Bracket, Engine & Radiator, Also Tower Bolts, Hydro Front Subframe
1 × $9.52 -
TRANSMISSION PAN, ZF 6 SPEED
1 × $105.33 -
FILTER - FUEL - FREELANDER 2
1 × $59.68 -
SWITCH, WINDOW LIFT
1 × $28.22 -
Water Pump, Standard Capacity, Solid Impeller
1 × $68.20 -
Filler Trim, Rear Corner side door
1 × $5.45 -
Clip, 1/4 Turn Click Type
1 × $2.81 -
DISC, BRAKE FRONT - D3/D4/RRS (GEO MET)
1 × $106.70 -
Caliper Seal Kit, Suit 8.4" Discs
1 × $23.41 -
BUSH, FRONT SWAY BAR, RANGE ROVER
1 × $55.06 -
HOSE CLIP MULTI USE
1 × $15.68 -
HT Lead Ignition Spark Tester
1 × $49.50 -
Coupling, Steering - D3/D4/RRS
1 × $231.00 -
CAP, COOLANT EXPANSION TANK - 200kpa
1 × $11.94 -
BALL JOINT, LOWER CONTROL ARM - DISCOVERY 3 & 4
1 × $23.87 -
AIR TO COIL REAR CONVERSION KIT DISCOVERY 2
1 × $231.00 -
Condenser, Air Conditioning
1 × $239.86 -
Bearing, Wheel Hub
1 × $93.50 -
Bleed Screw, Wheel Cylinders
1 × $3.52 -
Adaptor Between Carburettor & Air Cleaner, 1 1/4" SU 2/Hand
1 × $7.92 -
Camshaft Sensor
1 × $55.00 -
Rotor Arm, Lucas 45D Distributor
1 × $12.10 -
Apron Panel, Repair Section Front L/Hand
1 × $141.63 -
Fuel Bowl Gasket, SU
1 × $3.00 -
Brake Light Switch
1 × $8.53 -
ALLOY WHEEL NUT
1 × $7.70 -
Coil, Ignition
1 × $73.43 -
PADS - BRAKE - FRONT
1 × $22.00 -
FRONT ABS SENSOR KIT - DISCOVERY 1 & DEFENDER
1 × $66.84 -
ENGINE MOUNT - TD5
1 × $119.35 -
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
1 × $16.78 -
BRAKE SHOE KIT - XJ40
1 × $68.75 -
FILTER - ENGINE OIL
1 × $9.13 -
Abutment Bracket, HIF44 & HIF38 SU Carburettor
1 × $77.00
VAN
-
-22%Original price was: $1,402.50.$1,100.00Current price is: $1,100.00.
8.4″ Disc Brake Kit, Convert Drum Brakes to Disc Brakes
This kit is Suitable For 12″ or 13″Â Wheels. Will Not Fit 10″ Wheels
This kit includes every nut bolt and component necessary including uprights, bearings, ball joints, CV joints, brake discs (rotors), drive flanges, calipers. All new parts, not built up, but a fairly easy to bolt-on installation so you can check the parts and you need to partially strip to fit. Refer to workshop manual for torque settings.
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
$13.20
Abutment Bracket, Metal bracket that fits between the manifold for HS4 Carburettor
To secure cable to carburettor use # AYH9377
-
$77.00
Abutment Bracket. Metal bracket that fits between the Manifold HIF44 (1.75″) & HIF38 SU Carburettors. Â
For HS4 Carburettor use # 12G766S
To secure cable to carburettor use # AYH9377 clip
-
-
-
-
$34.65
Accelerator Cable, Rover Mini Single Point Injection
Suits Mini 1990 on with the 1275cc engine.
-
-
-
-
$36.25
Accelerator Pedal, Wider Type
This type of pedal was fitted to the Rover Mini and can be fitted to any Australian Mini
-
$7.92
Adaptor Between Carburettor & Air Cleaner, 1 1/4″ SU. This is a 2nd Hand part in good condition.
-
$16.78
Adaptor Fuel Bowl To Carby  L/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about 1 o’clock position.
-
$16.78
Adaptor Fuel Bowl To Carby R/Hand 30 Degree
This is the buffer that goes on some carbys (mainly twins) between the fuel bowl and the carby body, there is a L/H and a R/H this rubber has the cut at about ’11 o’clock position.