-
Setscrew, Multi use
1 × $1.05 -
Starter Switch Push
1 × $86.90 -
Alternator Conversion Plug, 5 Terminal to 3 Terminal
1 × $33.00 -
BRAKE FLUID TESTER
1 × $55.00 -
Brake Fail Switch
1 × $79.75 -
Accelerator Cable
2 × $12.10 -
Colour Tune, Single Plug Kit, 14mm
2 × $126.50 -
CHAIN - TIMING - PRIMARY
1 × $107.42 -
Distributor Cap, Side Entry 25D
1 × $38.50 -
Electronic Ignition Conversion Kit Suit 43D, 45D & 59D Type Distributor
1 × $82.50 -
Brake Pipe Bender
1 × $45.93 -
Australian Made Sticker
1 × $9.90 -
Headlamp Bucket Kit, (Bowl) Suit 7'' Lamps - CHROME BEZEL
1 × $40.00 -
HT Lead Ignition Spark Tester
1 × $49.50 -
HOSE - THROTTLE BODY HEATER OUTLET
1 × $26.40 -
HOSE - THROTTLE BODY HEATER OUTLET
1 × $30.53 -
Coil, Ignition
1 × $73.43 -
12000 SPARTAN WINCH 12V WITH STEEL ROPE
1 × $825.00 -
BUMP STOP SPACERS +1"
1 × $110.00 -
Thermostat, 74c, BORG & BECK
1 × $19.58 -
HOSE CLIP MULTI USE
1 × $15.68 -
Sensor, Fuel Injector Pressure
1 × $46.97 -
Adaptor, Inlet Manifold to Gulp Valve
1 × $5.50
Engine
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
$13.20
Abutment Bracket, Metal bracket that fits between the manifold for HS4 Carburettor
To secure cable to carburettor use # AYH9377
-
$77.00
Abutment Bracket. Metal bracket that fits between the Manifold HIF44 (1.75″) & HIF38 SU Carburettors. Â
For HS4 Carburettor use # 12G766S
To secure cable to carburettor use # AYH9377 clip
-
-
$7.92
Adaptor Between Carburettor & Air Cleaner, 1 1/4″ SU. This is a 2nd Hand part in good condition.
-
-
$12.19
Adaptor, Oil Cooler Hose to Filter
The original union that fitted on the A series block to take the oil cooler hose. Many kits now include the union as part of the hose. Filter head size 1/4″NPT.
-
$4.40
Adaptor Oil Pipe to Filter Head, All Mini’s
Suits Both Cartridge & Spin On Oil Filters
-
$2.20
Adaptor Oil Pipe to Filter Head. All Mini’s
Suits Both Cartridge & Spin On Oil Filters
This is Second Hand
-
$13.20
Air Pre-Heat Duct, On Manifold
Fitted between this and the air temperature control flap is a tube part number # 12H4344
-
-
-
$224.10
Alternator fitted to Rover Mini from 1996
Only this alternator sits higher than originally, with new brackets that will only fit the twin point injection cyl head.
-
$7.70
Alternator Adjusting Link,
This is a Second Hand Part
-
$17.91
Alternator Belt
For Mini’s with latest A plus water pump pulley # CAM6408 (4.75″ wide) and an alternator. This seemed to be fitted to most cars from 1980-1996.
1275cc from 1990 also used this belt with the large pulley.
# 2A601 pulley 3.875″ wide and # CAM6408 pulley used from A plus onwards is 4.75″wide.