-
Engine Timing Tool Kit - for Ford Duratorq Diesel
1 × $55.00 -
HANDLE, INNER DOOR LH
1 × $12.93 -
HT Lead Ignition Spark Tester
1 × $49.50 -
Setscrew, Multi use
2 × $1.05 -
ENGINE MOUNT, M10
1 × $9.63 -
CAP, COOLANT EXPANSION TANK - 200kpa
2 × $11.94 -
WRENCH, WHEEL NUT - HEAVY DUTY
3 × $20.63 -
SHOES - PARK BRAKE KIT - INCLUDES PINS & CLIPS
1 × $52.53 -
AIR FILTER, D4/D5/RANGE ROVER
1 × $19.64 -
Arm Upper Wishbone RH Front
1 × $146.03 -
Clip, Interior Trim
1 × $2.86 -
Grease Nipple Multi Use
2 × $2.70 -
Rotor Arm, 25D
1 × $13.20 -
Flywheel Locking Tool - Ford Dura-torq and Land Rover
1 × $27.50 -
Bulb Holder, Park Lamp In Head Lamp
1 × $14.30 -
12v/ 240v PORTABLE 45L FRIDGE FREEZER
1 × $1,228.15 -
FUEL CAP, DIESEL TANK
1 × $38.19 -
Starter Switch Push
1 × $86.90 -
FILTER - ENGINE OIL
1 × $11.00 -
BEARING - DOUBLE ROW - SUIT MOST MINI GEARBOX'S
1 × $101.95 -
Caliper Seal Kit, Suit 8.4" Discs
1 × $23.41 -
Anti-rattle Bush, Nylon
1 × $12.35 -
Centre Cap, Steering Wheel
1 × $13.20 -
ACTUATOR - TAILGATE - UPPER - DISCOVERY 3 & 4
1 × $104.50 -
Adjustable Brake Caliper Rewind Tool Kit
1 × $105.33 -
Flywheel Locking Tool - for JLR Diesel Engines
1 × $231.00 -
Crankshaft Speed/Position Sensor XJ40/ XJ6/ XJR
1 × $159.50 -
BRAKE FLUID TESTER
1 × $55.00 -
Bolt - Steering Arm to Swivel Hub
1 × $8.80 -
Alternator 17ACR, 45 Amp with Internal Regulator
1 × $181.50 -
Carburettor Jet Bearing Kit, 1-1/2'' SU
1 × $27.48 -
Boot Badge, Leyland Mini
1 × $13.20 -
BOLT (M16x200mm), DAMPER MOUNT to FRONT LOWER ARM - DISCOVERY & RANGE ROVER SPORT
2 × $11.00 -
Headlamp Bucket Kit, (Bowl) Suit 7'' Lamps - BLACK BEZEL
1 × $40.00 -
Adaptor Between Carburettor & Air Cleaner, 1 1/4" SU 2/Hand
1 × $7.92
Engine
-
Availability: This product is currently out of stock.
Thermostat, 82 Degree
Waxstat Brand
-
$13.20
Abutment Bracket, Metal bracket that fits between the manifold for HS4 Carburettor
To secure cable to carburettor use # AYH9377
-
$77.00
Abutment Bracket. Metal bracket that fits between the Manifold HIF44 (1.75″) & HIF38 SU Carburettors. Â
For HS4 Carburettor use # 12G766S
To secure cable to carburettor use # AYH9377 clip
-
-
$7.92
Adaptor Between Carburettor & Air Cleaner, 1 1/4″ SU. This is a 2nd Hand part in good condition.
-
-
$12.19
Adaptor, Oil Cooler Hose to Filter
The original union that fitted on the A series block to take the oil cooler hose. Many kits now include the union as part of the hose. Filter head size 1/4″NPT.
-
$4.40
Adaptor Oil Pipe to Filter Head, All Mini’s
Suits Both Cartridge & Spin On Oil Filters
-
$2.20
Adaptor Oil Pipe to Filter Head. All Mini’s
Suits Both Cartridge & Spin On Oil Filters
This is Second Hand
-
$13.20
Air Pre-Heat Duct, On Manifold
Fitted between this and the air temperature control flap is a tube part number # 12H4344
-
-
-
$224.10
Alternator fitted to Rover Mini from 1996
Only this alternator sits higher than originally, with new brackets that will only fit the twin point injection cyl head.
-
$7.70
Alternator Adjusting Link,
This is a Second Hand Part
-
$17.91
Alternator Belt
For Mini’s with latest A plus water pump pulley # CAM6408 (4.75″ wide) and an alternator. This seemed to be fitted to most cars from 1980-1996.
1275cc from 1990 also used this belt with the large pulley.
# 2A601 pulley 3.875″ wide and # CAM6408 pulley used from A plus onwards is 4.75″wide.