Cooling and Heating
-
$17.60
Retaining Clip for # GVS104 Temperature Switch for Radiator
Seal Part Number # CDU2334
-
$4.40
Mini radiator screw, suits all mini radiators fitted to australian minis originally, please note that this will not fit NEW 3/2/4 core radiators, these will be supplied with the new radiators. Also please note that (as per original leyland specs) the very tip of the screw may need to be cut off to avoid damaging the core or your radiator.
This screw holds the radiator shroud onto the radiator, you will require 6 for a full set.
-
$1.32
Seal Between JEF10005 Heater Matrix & Take Off Pipes
Qty 2 required per heater
Rover Mini
-
$8.80
Temperature Switch Seal on Radiator
This is the rubber seal that holds the transmitter # GVS104 in the bottom tank of the radiator.
Retaining Clip use # KTP9002
-
$1.38
Set Screw, 1/4″ x 5/8″ UNF, Multi Use
-
-
$1.21
Stud, Heater Tap On Cylinder Head
To Secure Heater Tap When Fitted To Cylinder Head or Secures Blanking Plate To Head
1/4″unf 1.1250″ long.
Sold Separately
Used With GFK3211 Nut
-
-
-
$35.81
Coolant Temperature Transmitter
This transmitter is denoted by it’s black plastic end. Mounted to the underside of the inlet manifold.
-
-
$71.50
Thermostat Housing
These were fitted to late model 76>81 Moke’s and Mini’s, the outlet faces the firewall not the front like on the earlier cars.
-
$55.00
Thermostat Housing, Forward Facing
With Temperature Gauge Hole
-
$2.82
Thermostat Housing Stud 48mm (1.9375″) Long
This is the length used on every A series engine until the introduction of the sandwich plate when longer ones were required.
5/16″ unc and unf at nut end, this stud is about 5cm long about 4cm from the bottom of the UNC thread
-
$5.57
Thermostat Housing Stud, 48.mm (1.9375″) Set Of 3
This is the length used on every A series engine until the introduction of the sandwich plate when longer ones were required.
5/16″ unc and unf at nut end, this stud is about 5cm long about 4cm from the bottom of the UNC thread