-
Side Panel Rear Quarter Left Hand, UK Mini
1 × $544.50 -
Cylinder Head Stud, Long 14cm Genuine New Old Stock
2 × $9.55 -
By-pass Hose Adaptor, Long
1 × $22.00 -
By-pass Hose, Standard
1 × $5.94 -
Heater Tap & Blanking Plate Gasket
1 × $0.66 -
Thermostat Housing
1 × $24.20 -
Thermostat Housing Stud 48mm (1.9375") Long
1 × $2.82 -
WINDSCREEN WIPER MOTOR
1 × $145.00 -
BUSH, FRONT of REAR LOWER CONTROL ARMS - DISCOVERY 3, 4 & RANGE ROVER SPORT
1 × $31.63 -
BUSH - LOWER - REAR KNUCKLE
1 × $19.10
Suspension
-
-
$24.26
Front Upper Control Arm Ball Joint suitable for the following models;
– Discovery 3
– Discovery 4
– Range Rover Sport -
$11.00
M16 x 200mm Bolt used to mount Front Damper to Front Lower Control Arms on the following models;
– Discovery 3
– Discovery 4
– L320 Range Rover Sport -
$11.94
BOLT M16 x 120mm for use on Front Lower Control Arms on Discovery 3,4 & Range Rover Sport Models
-
$84.32
Front Suspension Strut Boot Kit suitable for the following models;
– Discovery 3
– Discovery 4
– Range Rover Sport -
$19.10
BUSH – LOWER – REAR KNUCKLE – 2 PER CAR – RANGE ROVER 2002 – 2009 – RANGE ROVER SPORT 2010 – 2013 – DISCOVERY 3 2005 – 2009 – DISCOVERY 4 2010 – 2016
-
Availability: This product is currently out of stock.
CHASSIS TO BODY ISOLATOR BUSH
-
-
$31.63
Bush for the Front of the REAR Lower Control Arms found on;
– Discovery 3
– Discovery 4
– Range Rover Sport -
$21.01
Front Bush for REAR Upper Control Arms suitable for;
– Discovery 3
– Discovery 4
– Range Rover Sport -
$15.40
SUSPENSION BUSH FOR THE FRONT UPPER CONTROL ARMS IN DISCOVERY 3 & 4 MODELS
THERE ARE TWO BUSHES PER ARM, 4 BUSHES PER VEHICLE -
$42.90
BUSH, LOWER CONTROL ARM, D3 & D4
REAR BUSH OF THE FRONT LOWER CONTROL ARMS
*2x PER VEHICLE*
*THIS IS A SOLID RUBBER BUSH – NOT A FLUID FILLED FACTORY REPLACEMENT* -
$660.01
COMPRESSOR, AIR SUSPENSION (EARLY ‘HITACHI’ DESIGN) – D3/D4/RRS
Appropriate for vehicles with the early type compressor still fitted. Identifiable by original compressor in vehicle labelled as Hitachi and “Made in Japan”. These compressors utilise a ‘U’ shaped bracket. Later variants use an ‘L’ shaped version.
-
$108.80
LHF Upper Control Arm, Comes with Bushes & Ball Joint.
-